View RF5633HPCK-410_9032780.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1 of 11 optimum technology matching ? applied gaas hbt ingap hbt gaas mesfet sige bicmos si bicmos sige hbt gaas phemt si cmos si bjt gan hemt functional block diagram rf micro devices?, rfmd?, optimum technology matching?, enabling wireless connectivity?, powerstar?, polaris? total radio? and ultimateblue? are trademarks of rfmd, llc. bluetooth is a trade- mark owned by bluetooth sig, inc., u.s.a. and licensed for use by rfmd. all other trade names, trademarks and registered tradem arks are the property of their respective owners. ?2006, rf micro devices, inc. product description 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com. ordering information rf mems ldmos rf5633 single 5.0v, 3.3 to 3.8ghz linear power amplifier the rf5633 is a linear power amplifier ic designed specifically for wimax final or driver stage applications. the device is manufactured on an advanced ingap heterojunction bipolar transistor (hbt) process, and is provided in a leadless chip carrier with a backside ground. the rf5633 is designed to maintain linearity over a wide range of temperatures and power outputs. the external match offers tunability for output power over multiple bands. rf5633 features internal input and interstage match, power down mode, and power detector. features ? high gain; 34db ? supports low gain mode ? 2.5% evm wimax +28 dbm, 5.0 v ? integrated power detector ? multiple frequency ranges applications ? wimax customer premises equipment ? wimax access points ? ieee 802.16 wimax systems rf5633sq standard 25 piece bag rf5633sr standard 100 piece reel rf5633tr13 standard 2500 piece reel rf5633lpck-410 3.4 ghz to 3.6 ghz wimax evaluation pcba with 5 loose pcs RF5633HPCK-410 3.6 ghz to 3.8 ghz wimax evaluation pcba with 5 loose pcs ds120213 ? rf5633single 5.0v, 3.3 to 3.8ghz linear power ampli- fier package style: qfn, 24-pin, 4 mm x 4 mm x 0.9 mm
2 of 11 rf5633 ds120213 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com. absolute maximum ratings parameter rating unit supply voltage, rf applied -0.5 to +5.25 v dc supply voltage, no rf applied -0.5 to +6.0 v v dc dc supply current 2000 ma input rf power with 50 ? load +15 dbm operating ambient temperature -40 to +85 c storage temperature -40 to +150 c moisture sensitivity msl2 parameter specification unit condition min. typ. max. ieee802.16e, 5.0 v nominal condition t = 25 c, v cc = 5.0 v, v reg 1, 2, and 3 = 5.0 v, frequency = 3.4 ghz to 3.6 ghz, using a standard ieee802.16e 16qam waveform at 37% duty cycle unless oth- erwise noted. compliance ieee802.16e frequency 3.4 3.6 ghz output power 26.5 28 dbm with ieee802.16e, 16 qam standard waveform at <2.5% evm evm 2.5 3 % 802.16e increase in evm over evm floor; rf p out = +28 dbm, over temperature -40c to +85c stability 0 34 dbm pa should be stable when p out is measured from 0 to 34 dbm gain 32.5 34.5 36.5 db p out = 28 dbm low gain mode - gain reduction 24 db drop in gain versus high gain mode, by setting v reg2 = 0 v gain flatness, high gain mode and low gain mode 3 db peak-peak over any 200 mhz bandwidth. power detect voltage 0.2 1.8 v p out = 10 to 30 dbm. noise figure 5 db current operating 1000 1300 ma rf p out = +28 dbm, over temperature -40c to +85c quiescent 600 800 ma rf = off, v cc = +5 v, v reg = 5 v, over tempera- ture -40c to +85c i reg 6 10 ma rf p out = +28 dbm v cc = +5 v, v reg = 5 v, over temperature -40c to +85c shutdown 5 30 ua rf = off, v cc = +5 v, v reg = 0 v, over tempera- ture -40c to +85c power supply 5 5.25 v v reg1 , v reg2 , v reg3 input voltage 4.85 5 5.15 v turn-on time from setting of v reg 400 1500 nsec output stable to within 90% of final gain input return loss -15 -10 db output return loss -10 -7 db stable into output vswr 4:1 no spurs above -47 dbm no damage into output vswr 10:1 +5 dbm p in caution! esd sensitive device. exceeding any one or a combination of the absolute maximum rating conditions may cause permanent damage to the device. extended application of absolute maximum rating conditions to the device may reduce device reliability. specified typical perfor- mance or functional operation of the device under absolute maximum rating condi- tions is not implied. rohs status based on eu directive 2002/95/ec (at time of this document revision). the information in this publication is believed to be accurate and reliable. however, no responsibility is assumed by rf micro devices, inc. ("rfmd") for its use, nor for any infringement of patents, or other rights of third parties, resulting from its use. no license is granted by implication or otherwise under any patent or patent rights of rfmd. rfmd reserves the right to change component circuitry, recommended appli- cation circuitry and specifications at any time without prior notice.
3 of 11 rf5633 ds120213 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com. parameter specification unit condition min. typ. max. ieee802.16e, 5.0 v nominal condition t = 25 c, v cc = 5.0 v, v reg 1, 2, and 3 = 5.0 v, frequency = 3.6 ghz to 3.8 ghz, using a standard ieee802.16e 16qam 10 mhz bw waveform at 37% duty cycle unless otherwise noted. compliance ieee802.16e frequency 3.6 3.8 ghz output power 25.5 27 dbm with ieee802.16e, 16 qam standard waveform at <2.5% evm evm 2.5 3 % 802.16e increase in evm over evm floor; rf p out = +27 dbm stability 0 34 dbm pa should be stable when p out is measured from 0 to 34 dbm gain 32.5 34.5 36.5 p out = 27 dbm gain variation over temperature 2 db low gain mode - gain reduction 22 db drop in gain versus high gain mode, by setting v reg2 = 0 v gain flatness, high gain mode and low gain mode 3 db peak-peak over any 200 mhz bandwidth. power detect voltage 0.2 1.8 v p out = 10 to 30 dbm. noise figure 5 db current operating 1000 1350 ma rf p out = +27 dbm, over temperature -40c to +85c quiescent 600 800 ma rf = off, v cc = +5 v, v reg = 5 v, over tempera- ture -40c to +85c i reg 6 10 ma rf p out = +27 dbm v cc = +5 v, v reg = 5 v, over temperature -40c to +85c shutdown 5 30 ua rf = off, v cc = +5 v, v reg = 0 v, over tempera- ture -40c to +85c power supply 5 5.25 v v reg1 , v reg2 , v reg3 input voltage 4.85 5 5.15 v turn-on time from setting of v reg 400 1500 nsec output stable to within 90% of final gain input return loss -15 -10 db output return loss -10 -7 db stable into output vswr 4:1 no spurs above -47 dbm no damage into output vswr 10:1 +5 dbm p in esd human body model 500 v charge device model 1000 v
4 of 11 rf5633 ds120213 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com. package drawing pin function description 3 rfin rf input. this pin is matched to 50 ? and in dc-blocked internally. 6 vreg1 first stage input bias voltage. this pin requires a regulated supply to maintain nominal bias current. 7 vreg2 second stage input bias voltage. this pin requires a regulated supply to maintain nominal bias current. 9 vreg3 third stage input bias voltage. this pin requires a regulated supply to maintain nominal bias current. 10 pdet power detector provides an output voltage proportional to the rf level vcc3/rf out. 11 acg ac ground requires capacitor to ground. 13-18 vcc3/rfout rf output and bias for third stage. output is externally matched to 50 ? and needs a dc-block. 19 vc2 second stage supply voltage. 21 vc1 first stage supply voltage. 22 vbias supply voltage for the bias reference and control circuits. may be connected with vcc1, vcc2, vcc3 as long as appropriate isolation is provided. 1, 2, 4, 5, 8, 12, 20, 23, 24 n/c no internal connection. may be connected to ground. pkg base gnd ground connection. the back side of the package should be connected to the ground plane through as short a connection as possible, e.g., pcb vias under the device.
5 of 11 rf5633 ds120213 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com. pcb design requirements pcb surface finish the pcb surface finish used for rfmd's qualification process is electroless nickel, immersion gold. typical thickness is 3 ? inch to 8 ? inch gold over 180 ? inch nickel. pcb land pattern recommendation pcb land patterns for rfmd components are based on ipc-7351 standards and rfmd empirical data. the pad pattern shown has been developed and tested for optimized assembly at rfmd. the pcb land pattern has been developed to accommodate lead and package tolerances. since surface mount processes vary from company to company, careful process development is recommended. pcb metal land and solder mask pattern note: themal vias for center slub ?e? should be incorporated into the pcb design. the number and size of thermal vias will depend on the application. example of the number and size of vias can be found on the rfmd evaluation board layout.
6 of 11 rf5633 ds120213 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com. evaluation board schematic 3.4 ghz to 3.6 ghz operation
7 of 11 rf5633 ds120213 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com. evaluation board schematic 3.6 ghz to 3.8 ghz operation
8 of 11 rf5633 ds120213 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com. evaluation board layout 3.4 ghz to 3.6 ghz operation assembly top in1 in2 back
9 of 11 rf5633 ds120213 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com. evaluation board layout 3.6 ghz to 3.8 ghz operation assembly top in1 in2 back
10 of 11 rf5633 ds120213 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com. cc = 5.0 v and vreg1, 2, and 3 = 5.0 v
11 of 11 rf5633 ds120213 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com. v cc = 5.0 v and vreg1, 2, and 3 = 5.0 v

▲Up To Search▲

Price & Availability of RF5633HPCK-410

	To Download RF5633HPCK-410 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .